Dryer Repair in Mount Pleasant, SC

Rollers, idler pulley, or belt — the drum's supporting cast wears out as a group. The squeal is metal begging for replacement, and waiting until it seizes turns a cheap fix into a bigger one. We replace the wear kit as a set so you're not paying another service call for the next part in line.

Escaping lint means the airflow path leaks — a torn felt drum seal, a cracked lint-screen housing, or a vent joint parted inside the wall or cabinet. Beyond the dust, that's moisture and fire risk in the wrong places. We smoke-test the path, reseal, and the room stops needing a daily wipe-down.

We service both fuels and can convert vent and connection details on the appliance side, verify the flex line and shutoff, and leak-test every joint. New gas piping itself belongs to a licensed plumber — we'll tell you exactly what to have run, then finish, level, and test the dryer end properly.

A breaker that holds, then trips under heat load points at the element shorting to its housing, a failing motor, or a tired breaker itself. We isolate which by measuring current draw at startup and mid-cycle. Please don't just reset it repeatedly — each trip is the system telling on a real fault.